Guides › Bidet that fits an American Standard toilet

Bidet that fits an American Standard toilet: how to check before you buy

A bidet that fits an American Standard toilet is usually an attachment or a seat: most American Standard toilets take either, because most of its toilets are ordinary two-piece designs with a flat area behind the seat. The exceptions are one-piece and skirted models with no flat area behind the seat. To be sure, find your toilet's model name, measure three things (the seat-bolt spacing, the bowl length and the gap behind the tank), and check the supply valve. It takes about five minutes.

Try it: Got an American Standard? Take the one-minute quiz, leave your email at the end, and we'll send the fit check for your toilet before anything ships.

First, one confusion to clear. American Standard also sells its own bidet, but that is a different product from the one most people are searching for. This page is about adding a bidet to the toilet you already own.

American Standard's own bidets are not attachments

American Standard's product pages show Cadet bidets as separate bowls, such as the Cadet Monoblock Deck Mount Fitting Bidet Bowl (model 5023111.020) and a three-hole version (5023100.020). These are floor-mounted fixtures that sit beside the toilet and need their own plumbing. They are designed to match Cadet and Champion toilets in looks, not to attach to them. If what you want is a nozzle on your existing toilet for under $100, you want an attachment or a seat, not one of those.

The company also sells its own seat-style bidet, the AquaWash Essentials. One retailer review says it fit "perfectly" on an elongated Champion 4. That is a single customer's experience, not a guarantee, so check the fit chart for any seat you consider.

Step 1: find your toilet's model

Lift the tank lid carefully and set it somewhere safe. It is heavy and it breaks.
Look at the inside back wall of the tank. American Standard usually molds a model or part number into the china or stamps it there. Mineral buildup can hide it; scrub it with a soft brush.
Look up the number with "American Standard" in front. The product page tells you the family name (Cadet and Champion are two common ones), whether it is one-piece or two-piece, and whether the bowl is round or elongated.
Take a photo of the number so you can send it to a seller.

If you cannot read a number, don't worry. The fit comes down to measurements; the model only tells you what to expect.

Step 2: sort your toilet into a type

Your toilet is…	How to tell	Attachment?
Two-piece, flat deck	A separate tank bolted on top of the bowl, with a flat area behind the seat hinges	Usually yes
One-piece, flat deck	Tank and bowl are one smooth piece but a ledge sits behind the seat	Often yes; check the gap
One-piece, curved back	The bowl sweeps up into the tank with no ledge	Usually no; see French curve toilets
Skirted	Smooth sides hide the trapway	Often yes on top; plan the hose route. See skirted toilets

A retailer blog lists the Cadet 3 and the Champion 4 among toilets that pair well with bidet seats, and American Standard's Cadet and Champion lines are everyday two-piece toilets. We could not read that blog's full chart, and families vary within a model, so measure yours rather than trusting a family name.

Step 3: take the three measurements

Seat bolts. Measure from the center of one bolt to the center of the other. Most US toilets use a standard spacing, which is why most attachments fit; a toilet that differs is the exception. Our do bidet attachments fit all toilets page has the numbers.
Bowl length. From the bolts to the front edge of the rim. Elongated bowls measure about 18 inches or more, and round ones less. Many attachments are made for either; check the listing. See bidet that fits an elongated toilet and bidet attachment for a round toilet.
The gap behind the seat. Lift the seat and look at the flat strip between the bolt holes and the tank or back wall. An attachment's plate sits there. If the strip is tiny or sloped, it will not sit flat.

Step 4: check the water connection

An attachment needs a T-adapter on the toilet's water line. Look under the tank on the left or right.

Flexible braided hose: good. The T goes between the shut-off valve and the hose.
Rigid chrome pipe: the T adds about an inch, so the pipe may not reach. Swap it for a flexible supply line.
Thread size: most US toilets use a 7/8 inch inlet thread, which is what most kits ship. Check the kit's adapter before you shut off water. If it won't thread by hand, stop; T-valve doesn't fit lists the fixes.
Valve that doesn't turn: an old stiff valve can leak when moved. Call a plumber, or see do you need a plumber to install a bidet.

Which bidet type fits best on an American Standard?

A bidet attachment

The cheapest route and the most likely to fit a standard two-piece. It sits under your existing seat, needs no power and runs cold. See how to install a bidet attachment.

A bidet seat

A seat replaces yours. It is electric, so you need an outlet near the toilet, and it gives you warm water. Fit depends on bowl shape and the mounting holes. See attachment vs seat.

A handheld sprayer

Never touches the bowl, so the bowl shape doesn't matter. See attachment vs handheld.

What goes wrong, and what to do

The plate wobbles: the seat's back sits higher with an attachment under it, so the front bumpers may not touch evenly. Stick-on bumpers level it. See bidet attachment doesn't fit.
The seat won't stay put: check that the seat bolts are tight and the bolt anchors are tight against the bowl, not twisting.
Seat won't clear the tank lid: measure the gap between the seat hinge and the tank.
A drip at a joint: see bidet leaking from the T-valve.

Your seat's hardware matters as much as the bowl

An attachment sits under your seat, so the seat's hinge and bolts decide whether it all goes back together. Four types come up on everyday toilets:

Bolt-down hinges: the common kind. The seat bolts pass through the attachment's plate. Usually no trouble.
Quick-release seats: a bracket bolts down and the seat clicks on. The bracket goes through the plate. Check that the seat clicks fully back on afterwards.
Soft-close seats: work as normal, though the lid's resting angle can change a little because the back sits higher.
Top-fix bolts: tightened from above and held by a rubber anchor below. A plate can stop the anchor gripping; a longer top-fix kit solves it.

If the seat sits crooked afterwards, a stick-on bumper under the front corners levels it. If the lid knocks the tank, measure the gap before you buy.

Questions to ask a seller before you order

Does the box include a 7/8 inch T-adapter, and what size is the outlet?
Is the plate made for round bowls, elongated bowls, or both?
How much clearance does the unit need behind the seat hinges?
What is the return window, and who pays for the return if it doesn't fit?
Is the hose long enough for a toilet where the valve is on the far side?

A seller who can't answer these is guessing. Choose one who answers from your photos.

Mistakes people make with fit

Trusting "fits most toilets". It does, until yours is the exception. Measure.
Buying a bidet bowl by mistake. A search for an American Standard bidet shows the separate floor-mounted bowls first.
Forgetting the rigid pipe. The T adds about an inch, so a short rigid line may not reach.
Skipping the leak check. Wipe each joint with dry tissue after install, and check again after an hour and the next morning.
Forcing a thread. If it doesn't catch by hand, stop.

A shortcut when you are not sure

Send the seller three things before you pay: the model number, your three measurements, and two photos (from above with the seat up, and of the water pipe). A real seller can answer yes or no from those. If you are comparing brands rather than models, the brand-page guides help: Kohler, TOTO and Gerber follow the same method.

Which attachments to look at

Any bidet that fits an American Standard toilet is one that matches your bolt spacing and has room behind the seat, whatever the brand on the box.

Most mainstream attachments say they fit "most toilets" including American Standard. Compare the usual ones on price, nozzle and warmth in how to choose the best bidet attachment, and see what attachments cost. If you want a brand-by-brand view, try Tushy reviews and Luxe Bidet reviews.

Where ASSJET fits

ASSJET is a no-plug attachment: one knob, cold water, about five minutes to put on. It is not on sale yet. When it is, we'll ask for your toilet's model and measurements before you pay, so you never get a box that doesn't fit. The waitlist is on the quiz.

FAQ

Will a bidet attachment fit my American Standard toilet?

Usually, if it is a two-piece with a flat area behind the seat. One-piece toilets with a curved back are the exception. Measure first.

Does American Standard make a bidet attachment?

It makes bidet bowls (the Cadet bidet) and a seat-style bidet, the AquaWash Essentials. The bowls are separate floor fixtures.

Is a Cadet or Champion toilet good for a bidet?

A retailer blog lists the Cadet 3 and Champion 4 among toilets that work with bidet seats. Check your own model.

What is the standard bolt spacing?

Most US toilets use a standard spacing, which is why attachments fit; measure yours to be sure.

Do I need a plumber?

Most people do not. If the valve is stiff or the pipe rigid and short, a plumber is a cheap fix.

What if my attachment doesn't fit?

A handheld sprayer never touches the bowl. See the alternatives page.

More plain answers in our bidet guides, or find your bathroom god.

Sources

Cadet Monoblock Deck Mount Fitting Bidet Bowl (5023111.020), American Standard. https://www.americanstandard.ca/Two-Piece-Toilets/Cadet-Monoblock-Deck-Mount-Fitting-Bidet-Bowl/WHITE-5023111020
Cadet three-hole deck mount bidet bowl (5023100.020), American Standard. https://www.americanstandard.ca/two-piece-toilets/cadet-three-hole-deck-mount-fitting-bidet-bowl/white-5023100020
Toilets That Work Well With Bidet Seats, ManyBidets (blog). https://www.manybidets.com/blog/toilets-that-work-well-with-bidet-seats/
AquaWash Essentials bidet seat, Wayfair customer review. https://www.wayfair.ca/renovation/pdp/american-standard-siege-de-bidet-non-electrique-aquawash-essentials-avec-fonctionnement-manuel-asd13124.html