Guides › Bidet that fits Gerber toilet

Bidet that fits a Gerber toilet: how to check before you buy

A bidet that fits a Gerber toilet is, in most cases, a universal under-seat attachment, because it only needs your bowl shape (round or elongated) and the two seat bolt holes with a bit of clearance. We found no source that lists a Gerber model as incompatible, and none that certifies a specific one either, so the safe method is to measure your own toilet and compare it with the attachment's listed specs. This page shows the five measurements, the Gerber-specific things to look at and what to do if it doesn't fit.

Want a quick fit check for your toilet? Take the one-minute quiz, leave your email at the end, and we'll send our fit checklist with your result.

Short answer: will a bidet attachment fit a Gerber toilet?

Probably, if it is a standard two-piece toilet with a normal seat. Attachments are sold as universal for round and elongated bowls. Examples that vendors list as fitting both shapes include the Bio Bidet by Bemis BB70, the SlimEdge and the Peri-Jett medical attachment. "Universal" means it fits the most common layouts, and there are always exceptions, so measure. Gerber, a long-established US plumbing brand, makes many toilet styles over the years, and we can't say from one name which one you own.

Step 1: find out what you have

Lift the tank lid. Many toilets have the maker and a model number printed or moulded inside the tank, or on the back of the bowl.
Check under the seat hinges and on the bowl rim for the shape. A round bowl is nearly a circle; an elongated one is egg-shaped and about two inches longer.
Photograph it from the side. Is it two pieces (tank and bowl) or one? A one-piece toilet or a skirted base changes the install.
Note the age. Older toilets can have unusual bolt positions or water line fittings.

If you can't find a model number, don't worry. The measurements below matter more than the name.

Step 2: the five measurements

Measure	How	Why it matters
Bowl shape	Round or elongated	Most attachments suit both; a few seats and models need elongated. One vendor names the Bio Bidet BB-i3000 and the Brondell Ecoseat 100 as elongated-only
Bolt-hole spacing	Centre to centre across the two seat bolt holes	One guide says most bidets need around 5.5 inches between the holes
Clearance to tank	Bolt holes to the front of the tank	One guide says most seats need at least about 1.5 inches
Bolt-hole position	Are they on the rim or set back	The attachment sits on the bolts, so very set-back or slotted holes can shift it
Water line	Thread on the shut-off valve (usually 3/8 inch) and where it sits	The T-adapter must screw on and clear the wall

The numbers come from vendor fit guides and are a rule of thumb. Compare them with the specs for the exact product you want. Our do bidet attachments fit all toilets page walks through the same checks in more detail.

Round or elongated: how to tell in 30 seconds

Measure from the middle of the two bolt holes straight to the front edge of the bowl. About 16.5 inches usually means a round bowl and about 18.5 inches an elongated one; the gap is the two inches that makes the elongated bowl egg-shaped. Treat those as a guide, not a rule, and look at the shape too. You need this number mainly for seats. For an attachment it matters less, since most are made for both shapes. It still helps when you read a listing that says "fits standard round and elongated".

What you need on the day

An adjustable wrench, for the T-adapter and the supply line.
A tape measure and your phone, to write down and photograph the measurements.
A small towel and a bucket, for the water left in the line.
Plumber's tape, in case a thread weeps. Many kits include a washer instead.
Your receipt and the box, so a return stays easy until you know it fits.

A tidy kit and a tape measure turn the biggest fear, buying the wrong one, into a ten-minute check.

What can go wrong on a Gerber toilet

A tank that sits close to the seat. Gerber makes compact toilets too. If there is under 1.5 inches between the bolt holes and the tank, a thick attachment may not seat well. A thin plate attachment is the safer choice. What to do if an attachment doesn't fit covers the options.
A skirted or one-piece bowl. The smooth side hides the bolts and leaves little room under the rim. See how to install a bidet on a skirted toilet.
An oddly shaped bowl. Some bowls curve in a way that sits differently from a standard round or elongated. See bidet for a French curve toilet for what to do.
A T-valve that won't screw on. The shut-off valve thread or position can differ. When the T-valve doesn't fit shows the fixes.
A seat that isn't the original. If the seat was replaced, its bolts and the plate can sit differently from the factory ones.

Attachment or seat for a Gerber toilet?

An attachment is the safest fit because it sits between your bowl and your existing seat and uses the same bolts. An electric bidet seat replaces your seat, so it must match the bowl's shape, bolt spacing and clearance, and you also need an outlet. If you're comparing the two, read bidet attachment vs seat. For the shape question see bidet that fits an elongated toilet.

How to check a fit before you order

Write down the bowl shape and the three measurements above.
Open the product page and find its fit or compatibility chart. Bio Bidet, Bidet King and others publish them.
Read the 1- and 2-star reviews for "doesn't fit" and your toilet's name.
Look at the return policy. Free returns turn a fit worry into a small one.
If still unsure, ask the seller with your photo and numbers.

Installing on a Gerber toilet

The steps are the same as any two-piece toilet: shut off the water, flush, remove the seat, place the attachment on the bolt holes, refit the seat, then fit the T-adapter between the shut-off valve and the tank line. It takes about 20 to 30 minutes. The full steps are in how to install a bidet attachment. If you rent, bidet attachment for renters shows how to leave no trace.

If it doesn't fit

Too tight at the tank: try a thinner plate.
Bolts too short: longer stainless bolts are a few dollars at a hardware shop.
Plate rocks: use the rubber spacers that come with most attachments.
Hose too short: a longer braided hose with the same thread is a cheap part.

Other makers' fit guides

If you own a different brand, the same method works. We have a separate page for Kohler toilets, and the next ones planned are Duravit and back-to-wall models. Our best bidet attachment guide lists what to look for in any model.

Where ASSJET fits

ASSJET is a thin, no-plug attachment: one knob, cold water, no dryer. We aren't on sale yet and can't certify a fit for a Gerber model we haven't tested, so we won't promise one. Measure, compare, and join the waitlist on the quiz if you want to be told when we ship.

FAQ

Does a bidet fit a Gerber toilet?

Most universal attachments should, if the toilet is a standard two-piece with a normal seat. Measure the bolt-hole spacing and the clearance to the tank.

Do I need a special bidet for an elongated Gerber toilet?

No. Most attachments fit round and elongated bowls. A few seats are elongated-only, so check the listing.

How do I find my Gerber model number?

Look inside the tank, on the back of the bowl or under the tank lid.

What if the bidet is too big for my toilet?

Choose a thinner plate, check for spacers and return it if it won't sit flat.

Is a seat easier to fit than an attachment?

No. A seat replaces yours and needs a matching bowl, bolt spacing, clearance and an outlet.

Will a Gerber toilet seat bolt size matter?

Seat bolts on most toilets are a standard size, and attachments come with their own longer bolts or spacers. If the supplied bolts are too short for your seat and plate together, longer stainless ones are cheap at a hardware shop. Check that the bolt shaft is not rusted through before you reuse any.

Can I try one without installing anything?

Yes: a peri bottle or portable bidet needs no fit at all. See bidet attachment alternatives.

More answers in our bidet guides, or find your bathroom god.

Sources

Bio Bidet Toilet Seat Sizes and Compatibility Guide. https://biobidet.com/pages/compatibility
Will a Bidet Fit My Toilet?, Bio Bidet. https://biobidet.com/blogs/news/will-a-bidet-fit-my-toilet
Non electric bidet attachment fitment guide, Bidet King. https://bidetking.com/non-electric-bidet-attachment-fitment-guide
Easy 3 Step Fit Guide for Most Bidet Seats, Many Bidets. https://www.manybidets.com/blog/fit-guide-for-most-bidet-seats/
Bio Bidet by Bemis BB70, Best Buy. https://www.bestbuy.com/product/bio-bidet-by-bemis-bb70-bidet-attachment-white/J3R8H423CG